Vertical crusher is one of the commonly used crushers in the compound fertilizer industry. It uses a high-strength wear-resistant hard alloy chain with synchronous speed during the crushing process, suitable for crushing raw materials and returned materials. Especially for materials with high moisture content, they have strong adaptability and should not be blocked. The feeding process is smooth, and the material enters from the feeding port and collides with the high-speed rotating chain inside the casing. After being impacted, the material is squeezed and crushed, and then collides with the chain after hitting the inner wall of the casing. During the falling process, this material undergoes several impacts and becomes powder or particles below 3mm are discharged from the lower part.
Vertical crusher composition: The motor drives the main shaft to rotate, and the main shaft has two bearing seats, which are installed at the upper and lower ends of the casing. The casing assembly is installed on the lower frame, with a rotor disc and chain installed on the main shaft. The feeding hopper is located on the upper part of the casing. For the convenience of loading and unloading the hammer head, a valve is opened on the casing for easy disassembly and maintenance.
The following points should be paid attention to when using the organic fertilizer crusher for poultry and livestock manure:
1. After the installation and electrification of the poultry manure organic fertilizer crusher equipment, 3 kilograms of lubricating grease need to be added to the bearing seat.
2. After 72 hours of operation, the poultry manure organic fertilizer crusher equipment needs to replenish lubricating grease into the bearing seat.
3. When stopping, it is necessary to wait for the internal materials of the animal manure organic fertilizer crusher to be discharged before stopping.
4. If there is still residual material inside the machine due to a sudden power outage, it is necessary to manually move the triangular belt to remove the material.
5. If the discharge of the crushed material is too large, please open the screws on both sides of the poultry manure organic fertilizer crusher and observe whether the blade has worn into a circular arc. If it has worn into a circular arc, you can remove the pin and remove the blade from its face to continue using. If the wear is very severe, please replace the blade with a new one.
