Blog

Maintenance of chain organic fertilizer crusher after use

2024/08/24
 

Chain type organic fertilizer crusher is a key equipment used in organic fertilizer production, mainly used to crush large organic materials such as straw, livestock manure, etc. to a particle size suitable for granulation. In order to ensure the long-term stable operation and extend the service life of the equipment, maintenance after use is crucial. Here are some maintenance points for chain organic fertilizer crushers after use:

Cleaning: After each use, the residual materials inside and outside of the Chain type organic fertilizer crusher should be thoroughly cleaned. Use a soft brush or compressed air to remove residue from blades, chains, and sieves to avoid affecting their next use after the material has hardened.

Check the blades and chains: Check the wear of the blades and chains. Blades and chains are vulnerable parts in crushers and may need to be sharpened or replaced after prolonged use. Regularly inspect and adjust or replace blades and chains based on wear to ensure effective crushing.

Lubrication: Regularly lubricate the bearings, chains, and other moving parts of the crusher, using appropriate lubricating oil or grease to reduce wear and extend service life.

Check fasteners: Check all fasteners of the chain organic fertilizer crusher, including screws, bolts, etc., to ensure that they are not loose. Loose fasteners may cause unstable equipment operation and even damage the equipment.

Checking the sieve: The cleanliness and integrity of the sieve are crucial for maintaining the crushing effect. Check if the screen mesh is damaged or blocked, and if necessary, clean or replace it.

Electrical inspection: Check the electrical components of the crusher, such as the motor, cables, and control panel, to ensure that they are in good condition and there are no exposed wires or damaged parts.

Storage: When not in use, the crusher should be stored in a dry, ventilated environment to avoid moisture and corrosion.

Regular maintenance: According to the recommendations of the equipment manufacturer, perform deep maintenance regularly, including replacement of worn parts, comprehensive cleaning and inspection, to ensure optimal performance of the equipment.

Operation record: Record the time of each use, the type and quantity of crushed materials, maintenance and inspection status, in order to track the operation status and maintenance history of the equipment.

Train operators: Ensure that all operators have received appropriate training, understand the operation, maintenance, and safety procedures of the equipment, and reduce the risk of operational errors and accidents.

By following the above maintenance points, the reliability and efficiency of the Chain type organic fertilizer crusher can be significantly improved, the failure rate can be reduced, the service life of the equipment can be extended, thereby reducing production costs and improving production efficiency.